A high quality wireless doorbell linked to a wireless brushed chrome bell push on a black Perspex plinth. The plinth incorporates a wireless extender and is connected to a brushed chrome bell push, so that it becomes a purely wireless bell push arrangement without any need to cable to the inside. This then sends a wireless signal around your home when the bell push is pressed. The Perspex plinth can either be mounted flush to the wall with a standard backplate opening or surface mounted to the wall. The system has a 150m distance, 84dB volume, LED visual light and 6 melodies and operates at a frequency in the 868MHz range, which is a less crowded, and avoids any problems with interference.
- Brushed Chrome bell push on a black Perspex plinth.
- 150m range (metal frames, thick walls and UPVC frames will reduce the operating distance).
- Digitally enhanced, crystal clear sound that carries well throughout the home. - 6 melodies
- Honeywell ActivLink™, using the 868MHz frequency.
- Chimes - 4 x AA Batteries
- Choice of 6 chime sounds.
- Can operate in a front door / back door mode with a 2nd push (purchased as an extra item).
- LED Visual Alert - useful for noisy environments and the hard of hearing.
- Pre-programmed push to chime and self-learning to avoid interference with neighbours chimes.
- Fixings included and the bell push is supplied with a battery.
To Listen to Sound Samples, Click Below:
- Dimensions - Door Chime 110 x 70 x 64mm
- Dimensions - Bell Push Plinth, 110mm wide x 100mm high x 25mm deep
- Dimensions - Bell Push Button, 76mm x 25mm
- Batteries - Bell push, 1 x CR2032 (supplied) - typical life 2 years
- Sound Level dB@1M, 84db (Can be heard 80m away)
- Chime unit Colour - White/Silver, Bell push chrome on black Perspex Plinth
- No of tunes available, 6
- Operating frequency, 868MHz.
- Operating temperature range for all chimes and pushes is -5°C to + 40°C.
- IP Rating, Bell push IP55