This item is a period style bell push on a wooden plinth with an internal wireless extender. The extender will send a wireless signal to Byron wireless doorbells, and is completely protected for outdoor use. Just attach the plinth unit to a wall or flat surface (not metal) and when the bell push button is pressed it will send a wireless signal that can be detected by internal wireless chime units. There is no requirement for a cable to the inside of your property - it is a wireless bell push button in a period style.
- Dimensions, 115mm square (4.55"), 25mm deep (1").
- Varnished Mahogany
- Bell Push, 76mm diameter. (3")
- Internal Wireless Extender, Range 125m (open field conditions).
- For use with Byron BY range of doorbells only.
- Battery, 1 x CR2032 (supplied) - typical life 2 years.
- Distance between mounting screw holes, 45mm (1.75").
- "Press" can be adjusted by 90 deg. for different positioning.
- Screws and Fixings included.
- Operating frequency, 868MHz.
- Operating temperature is -10°C to + 40°C.
- IP Rating, extender, IP55.
- No cabling to the inside of property required, and the plinth should not be placed on metal.
- Extra 100m Portable Chime Unit: Click Here [ BY504Wx ]
- Extra 100m Plug-in Chime Unit : Click Here [ BY514Wx ]
- Additional Period Wireless Plinth assemblies - General : [ Click Here ]
- Additional Period Wireless Plinth Assemblies - Black Ash : [ Click Here ]